Description
The D6 contains configurations for d&b loudspeakers and a linear mode; exceptions are 2-Way Active, V-Series and B2-SUB. The signal delay capability enables user definable settings of up to 340 msec (=100 m/328.1 ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. The D6 incorporates a digital rotary encoder and a LCD display to configure the amplifier.
The D6 incorporates Class D amplifiers utilising a switch mode power supply with active Power Factor Correction (PFC), suitable for mains voltages 100 V/120 V/200 V/ 230 V, 50 – 60 Hz and maintains a stable and increased output when used with weak or unstable mains supplies. It is supplied with two NL4 loudspeaker output connectors. RJ 45 connectors enable access to the Remote network via CAN-Bus. d&b System check verifies that the system performs within a predefined condition, whilst d&b Load monitoring enables an automatic and continuous impedance monitoring. Both can determine the status of an LF or HF driver in systems with multiple elements, even if these are crossed over passively.
Technical Specifications
| Controls and indicators | |
|---|---|
| POWER | Mains power switch |
| SCROLL/EDIT | Digital rotary encoder |
| Display | Liquid Crystal Display (LCD)/120 x 32 pixel |
| ISP, GR, OVL A/B | LED indicators |
| Digital Signal Processing | |
|---|---|
| Equalizer | 4-band PEQ/Notch |
| Latency analog and digital inputs | 0.3 msec. |
| Delay setting | 0.3 – 340 msec with 0.1 msec detents |
| Configurations | current d&b loudspeakers and linear mode except 2-Way Active, V-Series and B2-SUB |
| Function switches | d&b loudspeaker specific circuits |
| Frequency generator | Pink noise or Sine wave |
| Sampling rate | 96 kHz/27 Bit ADC/24 Bit DAC |
| Connectors | |
|---|---|
| INPUT ANALOG (A1, A2) | 3 pin XLR female |
| ANALOG LINK (A1, A2) | 3 pin XLR male |
| INPUT DIGITAL (D1, D2) | 3 pin XLR female AES 3 |
| DIGITAL LINK (Output) | 3 pin XLR male |
| Sampling rate | 48 kHz/96 kHz |
| Sampling Digital AES/EBU | 48 kHz/96 kHz |
| OUT CHANNEL A/B | NL4 |
| REMOTE | 2 x RJ 45 parallel, CAN-Bus |
| SERVICE | USB type B |
| Mains connector | powerCON® |
| Data (linear setting with subsonic filter) | |
|---|---|
| Maximum output power per channel (THD+N < 0.5%, all channels driven) CF = 6 dB at 4 / 8 ohms CF = 12 dB at 4 / 8 ohms |
2 x 600/350 W 2 x 600/350 W |
| S/N ratio (unweighted, RMS) | > 110 dBr |
| Power supply | |
|---|---|
| Type | Autosensing switch mode power supply with active Power Factor Correction (PFC) |
| Rated mains voltage high range | 208 – 240 V, 50 – 60 Hz |
| Rated mains voltage low range | 100 – 127 V, 50 – 60 Hz |
| Dimensions, weight | |
|---|---|
| Dimensions (H x W x D) | 2 RU x 19″ x 353 mm/13.9″ |
| Weight | 8 kg/17.6 lb |
More Information
For more information, including drawings and documentation, please click here.
